Alon a8000

The Alon a8000 combines satellite communications, GNSS positioning, solar power, onboard sensors, user controls, and local wireless connectivity in one sealed marine enclosure.

Independent operation. Continuous vessel awareness.

Alon a8000 viewed from the front-left side

Physical Attributes and Communication

The hardware is designed to operate independently of vessel power while continuously monitoring its own condition and its relationship to the vessel.

Sealed Marine Enclosure

Factory-sealed and UV-stabilized

  • All antennas and primary components are housed internally.
  • A unique serial number is stored in protected non-volatile memory and indelibly marked on the enclosure.

Connected by Design

One autonomous vessel-side hub

  • Integrates satellite communications, positioning, solar power, sensors, user controls, and local wireless connectivity.
  • Maintains its own identity and reports its condition to shore.
Iridium, Bluetooth 5, and NFC communication technologies supported by the Alon a8000

Communication

Global and local connectivity

  • Integrated Iridium satellite modem and GNSS receiver for global two-way communications and positioning.
  • Bluetooth 5 connectivity for authorized apps, service tools, nearby Alon units, and compatible wireless sensors.
  • Integrated NFC reader supporting NFC-A Type 2 tags for recording tag identity, time, position, and associated traceability or activity data.

Easy Installation & Tamper Detection

Installation validation and event reporting help establish confidence in the unit’s relationship to the vessel.

Easy Installation & Tamper Detection

Installation validation and event reporting

  • Secure mount supports quick installation while preventing access to mounting screws after installation.
  • Automatic validation detects mounting screws and confirms GNSS, satellite, and charging conditions before normal reporting begins.
  • Mount separation, screw removal, enclosure opening, and covering are recorded with time and position and transmitted to shore.
Alon installation detail
Alon setup integrity detail
Alon device installed on a waterfront pole
Alon tamperproof mount detail

Autonomous Intelligence

Power, sensing, diagnostics, and software updates continue working together without requiring crew intervention.

Autonomous Solar Operation

Self-sustaining power and energy management

  • Integrated solar panel charges the internal battery; no vessel wiring or external power is required for normal operation.
  • Low-power modes conserve energy and automatically resume full operation when sufficient charge is available.
  • Solar harvesting, battery condition, and power events are monitored and reported.

Built-in Sensors and Intelligence

Continuous onboard detection and event awareness

  • Always-on motion and orientation sensing supports persistent-tilt, rough-water, and capsize detection.
  • Configurable thresholds and onboard algorithms distinguish vessel operations.
  • Detected anomalies can generate automatic event reports without crew intervention.

Remote Configuration and Diagnostics

Shore-controlled settings and system health checks

  • Reporting intervals, operating thresholds, geo-fences, alerts, and other configurations can be updated over the air.
  • Authorized shore systems can request health information, retrieve logged data, and confirm completed configuration changes.

Intelligent Update Distribution

Resilient software delivery across multiple connections

  • Updates can arrive through Adarna over Bluetooth, Lawin over Bluetooth, the Iridium satellite network, or nearby Alon units.
  • Updates can transfer between units over Bluetooth, extending fleet coverage while reducing satellite airtime and direct service access.
Navcast sends updates through Iridium to an Alon; Adarna and Lawin send updates over Bluetooth, and the Alon forwards them to nearby Alon units

Controls and Power

Physical controls and local notifications make status, commands, and safety actions legible on the vessel.

Physical Switch and User Notifications

Local control and status feedback

  • Three-position mechanical switch provides normal operation, on-demand status or Bluetooth commands, and SOS activation.
  • Six RGB LEDs show Battery, Iridium, GNSS, Solar Charging, Safety, and Notifications status.
  • An internal beeper draws attention to faults, warnings, weather alerts, NFC reads, and other configured conditions.
Alon controls shown powered off
Alon controls shown powered on

Battery and Power Management

Internal rechargeable battery

  • 5,200 mAh nominal capacity.
  • Illustrative battery-only operation is approximately 30 days with hourly reports or 15 days with 15-minute reports under Basic Operation assumptions.
  • Settings remain persistent across all unit power modes, while generated events provide shore-side visibility into power-related conditions and transitions.

Vessel Accessories and Sensor Integration

Physical traceability tools and third-party sensors extend what the Alon a8000 can identify, record, and transmit.

Tamperproof Mount

The tamperproof mount securely attaches the Alon a8000 to the vessel and helps prevent unauthorized removal or interference. Its durable design protects the unit during normal vessel operations while allowing attempted tampering to be detected and reported to shore.

  • Supports rapid installation while preventing access to vessel-mounting screws once the Alon unit is secured.
  • Alon automatically detects installation and continuously monitors the connection.
  • Removal from the mount is detected and recorded as a tamper event with associated time and position.
  • Any attempt to remove or relocate the installed unit creates a detectable event trail.
Alon tamperproof mount
RFID card being tapped on the Alon reader

RFID Tags

Each RFID tag contains a unique identification number that can represent a message, action, asset, person, catch, or incident type. When scanned, the Alon a8000 records the tag ID with the scan date, time, and vessel position, then transmits it to shore.

  • A successful scan can be confirmed locally through Alon LEDs and the audible indicator.
  • The shore-side system can associate each tag ID with a predefined category, workflow, asset, person, catch, or incident type.
  • Tag records can be displayed in SkyTracker or integrated with authorized fisheries and traceability systems.
  • Use cases include catch traceability, fishing-activity records, asset identification, Hotline incident reporting, and location marking.

Third-Party Sensor Integration

  • Compatible third-party sensors can transmit data to the Alon a8000 over Bluetooth using a Navcast-provided Software Development Kit.
  • Alon stores sensor data and transmits it to shore through the Iridium satellite network.
  • Sensor data is made available through a secure API for authorized third-party systems.